Random 50 Questions

Even if no train is in sight at a level crossing, it is important to drive with care. Always approach level crossings cautiously because trains can appear unexpectedly, and there might be other factors such as signals or barriers that need attention.

When your vehicle breaks down on a two-way road, you should place the warning triangle at least 45 metres behind your vehicle. This distance helps warn oncoming traffic about the obstruction and gives them enough time to react safely.

If your tyre blows out, slow down gradually and steer carefully to the shoulder of the road, where you can safely stop and replace the tyre. Stopping in the middle of the road or in a driving lane is extremely dangerous and can cause accidents.

The sign shown means Dual Carriageway Ends.

Dual Carriageway Ends warns the driver that the divided road will soon become a single road with traffic in both directions. Proceed with caution.

That’s a Slippery Road Ahead.

This Slippery Road Ahead sign warns drivers that the surface ahead may be slippery, especially when wet. Drivers should reduce speed and avoid sudden maneuvers.

This is a Wheelchair Crossing sign.

The sign indicates that individuals using wheelchairs may be crossing or present in the area. Drivers should reduce speed and exercise extra caution.

The sign displayed is for Cyclists

This warning sign indicates that cyclists may be on or crossing the road ahead. Drivers should stay alert and give them plenty of space.

A solid white line marking a cycle lane indicates that you must not drive in that lane during its operational period. This lane is reserved for cyclists, and driving in it could endanger them or lead to a traffic violation.

The amount of alcohol that can be consumed to stay within the legal limit of 0.08mg varies depending on several factors, including your body weight, metabolism, and the alcohol content in the drink. Sparkling Star (or any alcoholic beverage) contains a specific amount of alcohol, and even a small amount can potentially put you over the legal limit.

In general, it's safest to avoid drinking alcohol altogether if you plan to drive, as any amount can impair your ability to drive safely. Always err on the side of caution.

When entering a built-up area or town, the general speed limit is 50 km/h, unless otherwise indicated by road signs. This limit helps ensure the safety of pedestrians, cyclists, and other road users in urban areas.

If your doctor has prescribed glasses for you to read vehicle number plates at the required distance, you must wear them at all times when driving. It's crucial for your safety and the safety of others on the road to be able to read signs, number plates, and any other visual cues clearly.

Before making a U-turn, it's crucial to look over your shoulder to check for any blind spots and ensure it is safe to turn. Relying only on mirrors may not give you a complete view of approaching vehicles.

When crossing traffic, it’s important to cross with care. This means you should ensure it’s safe to do so, check for oncoming traffic, and cross only when it is clear. Always make sure you have enough space and time to safely maneuver, rather than rushing or crossing immediately.

Before overtaking a long vehicle, you should:

1. Signal your intention to let other road users know your move.
2. Use your horn (if necessary) to alert the driver of the long vehicle, especially if they might not see you due to blind spots.
3. Ensure the road ahead is clear and that it’s safe to overtake.
4. Execute the maneuver quickly and safely, returning to your lane smoothly.

When approaching a school bus that is picking up or dropping off children, you must stop and allow the children to cross safely. Children can be unpredictable, and stopping ensures they have the right of way without any risk. Always remain alert and only proceed when it is completely safe.

A driver should allow a two-second stopping gap when following all vehicles, including cars, trucks, and motorbikes. This gap provides enough time to react and stop in case the vehicle in front of you suddenly brakes. The two-second rule is a basic safety measure to ensure sufficient distance and avoid collisions.

Horses can be easily startled by sudden movements or loud noises. Always overtake carefully and slowly to ensure the safety of both the rider and the horse. Give them plenty of space and avoid honking or revving your engine. If necessary, wait until it is completely safe before passing.

You should stop, and then move slowly until you have a clear view to ensure it is safe to proceed. Moving cautiously helps avoid collisions with unseen oncoming traffic.

When descending a hill, you should avoid braking excessively — it can cause your brakes to overheat and fail. Instead, use a low gear to control your speed and apply the brakes gently when necessary.

As you approach a bridge, especially one with limited visibility, consider using your horn to alert other drivers of your presence. This is particularly useful on narrow or humpback bridges where oncoming vehicles may not be visible until the last moment. Always approach bridges with caution, especially narrow or blind ones. Using your horn can help prevent collisions and ensure a safer crossing.

If a vehicle comes up quickly behind you, flashing its headlights, it's signaling that it wants to overtake. The safest option is to allow the vehicle to pass. Maintain your speed and position, but don’t speed up or brake abruptly—just let the other vehicle safely overtake.

If you are approaching traffic lights that have been green for some time, it's important to be ready to stop. Traffic lights could change to red at any moment, so you should prepare to slow down and stop if necessary.

"Watch carefully for the sudden appearance of pedestrians."

When a bus is stopped at a bus stop, pedestrians may suddenly step into the road, especially passengers getting off the bus. You should reduce your speed, be extra cautious, and be prepared to stop if necessary to avoid accidents.

When driving a slow-moving vehicle on a narrow winding road, it's important to pull in safely when possible, allowing faster vehicles to overtake. This helps prevent traffic buildup and ensures safer driving conditions for everyone.

On a wet road, applying your brakes gently helps avoid skidding, which can occur when the tires lose grip on the slippery surface. Sudden or harsh braking can cause the wheels to lock, leading to a loss of control. By braking gently, you maintain better control of the vehicle and reduce the risk of skidding.

When following a large vehicle, stay out of its blind spots by positioning your vehicle in a place where the driver can see you in their mirrors. These blind spots are usually located directly behind the vehicle, along the sides (especially the right side), and sometimes in front of the vehicle. To avoid these, ensure you:

• Position yourself slightly to the left of the large vehicle, staying visible in the driver's side mirror.
• Keep a safe distance so you aren't directly behind or too close to the vehicle.
• Pass the vehicle quickly when overtaking to minimize the time spent in their blind spots.

This will help you stay visible and reduce the risk of accidents.

Before moving off, a driver must check their surroundings, look into the mirrors, and signal their intentions. This ensures awareness of other vehicles, pedestrians, and any potential hazards, improving safety for everyone on the road.

According to the Ghana Highway Code, Red means: "STOP. Wait behind the stop line on the carriageway."
Amber means: "STOP at the stop line." If you have already crossed the white line when the light turns amber, you should proceed with caution. If you have not crossed the white line yet, you must stop.

The sign "Stop! Look! and Listen!" typically indicates a level crossing ahead, where a railway track intersects the road. Drivers should stop, check for trains, and proceed with caution.

The right foot is used to operate both the accelerator and the brake pedal, allowing for smooth transitions between speeding up and slowing down. The clutch pedal (in manual cars) is always operated with the left foot.

Seat belts are designed to restrain passengers and keep them securely in their seats during sudden stops or collisions, preventing occupants being thrown out in an emergency and reducing the risk of serious injury or ejection from the vehicle.

When this indicator light comes on, it usually signals that there is an issue with the engine oil level or pressure. You should check the engine oil level immediately to ensure that the engine is properly lubricated. Low engine oil can cause significant damage to the engine if left unchecked. It's important to top up the oil if it's low, or if the light stays on even after topping up, to have the engine checked by a mechanic.

The hand brake is also known as the parking brake or emergency brake.

It is used to keep the vehicle stationary when parked or to assist in stopping the vehicle in an emergency.

When you change to a lower gear, the engine provides more resistance, which slows down the vehicle without relying too much on the brakes. This technique, known as engine braking, helps maintain control, especially on steep descents or in slippery conditions.

If you adjust your side mirrors and can only see the sides of your vehicle, it means your mirrors are adjusted incorrectly. They should be angled outward so you can only see a small portion of your car's side, allowing for a wider view of the road and traffic behind you. The goal is to see as much of the lane beside you as possible, not your own car.

Proper mirror adjustment helps reduce blind spots, making it easier to spot vehicles approaching from behind and beside you, which improves overall road safety.

The muffler is a device in the exhaust system designed to reduce excessive noise from the engine. It helps control sound by dampening and redirecting exhaust gases before they exit the vehicle.

This sign prohibits all motorized and non-motorized vehicles from entering beyond this point. It's often used at one-way streets (wrong direction), restricted zones, or closed roads, ensuring total restriction to traffic for safety or regulation purposes.

This sign instructs all drivers to stop when directed by police. It is commonly used at checkpoints or during controlled traffic situations and must be obeyed at all times.

The No Right Turn sign indicates that drivers are not permitted to make a right turn at the junction ahead. It is typically placed in locations where right turns may pose a safety risk or disrupt the smooth flow of traffic.

This sign prohibits vehicles exceeding 5 tonnes (laden weight) from entering the road. It’s used to protect roads, bridges, or areas not designed to handle heavy loads.

This sign means you must not make a U-turn at this location. It is commonly placed at intersections, highways, or curves where turning around would be unsafe or disruptive to traffic flow.

The correct answer is "End of Prohibition".

This sign tells you that all earlier rules like no overtaking or speed limits have ended. You can now drive normally, but still follow the general road laws.

The correct answer is "Keep Left".

The “Keep Left” sign instructs drivers to stay or move to the left of an obstruction or divider on the road.

The correct answer is "Priority Road".

This sign means vehicles on this road have the right-of-way over others entering or crossing it.

The correct answer is "End of Motorway".

This sign means the motorway is coming to an end. Get ready for normal roads ahead — there may be lower speed limits, crossings, or slower traffic.

The correct answer is "No Through Road".

Warns that the road ends ahead. Only use it if you have a reason to enter (e.g., visiting someone there).

The correct answer is "No Through Road on Right".

This sign warns that the road to your right ends ahead. Don’t turn right unless you have a reason to go there.