Driving Behavior Test

When driving on a motorway at night with other vehicles ahead of you, you should use dipped headlights. This ensures you have enough visibility without dazzling other drivers. Full beam headlights should only be used when there are no vehicles in front of you or approaching from the opposite direction.

When a driver pulls out of a side road in front of you, forcing you to brake suddenly, you should ignore the error and stay calm. Reacting with frustration or aggressive behavior, such as flashing your lights or sounding your horn to show annoyance, can escalate the situation and create more risk. The best response is to stay calm, focus on safe driving, and avoid actions that could compromise your safety or the safety of others.

When approaching a zebra crossing, if pedestrians are waiting to cross, you should slow down and be prepared to stop to allow them to cross safely. You must give way to all pedestrians, not just the elderly or infirm, and never wave them across or use your headlights to signal them. Always prioritize pedestrian safety at crossings.

Drive on and stop after the intersection

When an emergency vehicle, like an ambulance, is approaching with its lights flashing and siren on, you should not stop in the intersection, as this could block the ambulance and cause a traffic hazard. You should continue driving and pull over or stop safely after clearing the intersection, allowing the emergency vehicle to pass.

Driving while tired or unwell, especially with a severe headache, significantly impairs your reaction time, focus, and decision-making abilities. It’s crucial to ensure you are in good condition before getting behind the wheel to avoid accidents or endangering yourself and others. If you feel unwell, it's best to rest and only drive once you're fully fit.

If a vehicle is approaching you on the wrong side of the road, the safest action is to warn them with your horn and move to the right as far as possible to avoid a collision. Staying in your lane or relying only on your lights may not be enough to prevent an accident.

On a freshly graveled road, loose stones can reduce traction and increase stopping distances. Vehicles overtaking you can kick up gravel, which may damage your windshield or reduce visibility. Additionally, sudden maneuvers on loose gravel can lead to skidding. It’s important to reduce speed, maintain a safe following distance, and be extra cautious of vehicles overtaking to avoid accidents.

Road humps (ramps) are designed to slow down vehicles for safety. Driving too fast over them can damage your vehicle and cause discomfort. Always reduce speed when approaching and crossing road humps.

Your reaction time will be much slower when you are tired, as fatigue reduces alertness, concentration, and the ability to respond quickly to hazards. Driving while tired increases the risk of accidents, so it's important to take breaks and rest if you feel drowsy.

"Turn the wheels away from the curb."

When parking uphill next to a curb, you should turn your front wheels away from the curb. This way, if your vehicle rolls backward, the rear of your front tire will rest against the curb, preventing it from moving into traffic.

When approaching a parked vehicle with a driver seated inside, always be mindful that the door may be opened suddenly. This could obstruct your path or cause a collision, especially if you're driving too close to the parked vehicle.

At an intersection controlled by traffic lights, pedestrians have the right of way when crossing at designated pedestrian crossings, even if the traffic light turns green for vehicles. Always yield to pedestrians to ensure their safety.

Before moving off from behind a parked car, you should use all the mirrors on the vehicle to check for approaching traffic, cyclists, or pedestrians. Additionally, looking over your shoulder for blind spots ensures a safe maneuver.

If another driver upsets you in traffic, it's important to try not to react emotionally or aggressively. Flashing your headlights or sounding your horn can escalate the situation and increase the risk of conflict. Maintaining your composure and continuing to drive safely is the best course of action. Letting go of any frustration and focusing on safety will help keep the roads safer for everyone.

Taking up the correct position in good time signals your intentions to other road users, allowing them to anticipate your movement and adjust accordingly. This improves road safety and ensures smoother traffic flow. Proper positioning also helps prevent last-minute lane changes, which can be dangerous.

If you are approaching traffic lights that have been green for some time, it's important to be ready to stop. Traffic lights could change to red at any moment, so you should prepare to slow down and stop if necessary.

Driving on a wet road can significantly impact visibility due to the glare from reflected light on the water, making it harder to see other vehicles, pedestrians, and road markings, especially at night or in heavy rain, which can significantly reduce your ability to react to potential hazards.

Additionally, fog or mist may develop in wet conditions, further impairing visibility.

It’s important to drive cautiously and adjust speed when road conditions are wet to maintain control and visibility.

You should stop, and then move slowly until you have a clear view to ensure it is safe to proceed. Moving cautiously helps avoid collisions with unseen oncoming traffic.

Explanation:

Taking regular breaks to rest and hydrate during a long journey helps prevent fatigue and keeps you focused. Rest allows your body and mind to recover, while hydration maintains energy levels and concentration. Together, these breaks improve alertness and reduce the risk of accidents caused by tiredness.

You should keep well back when following a large vehicle because it allows the driver to see you in his mirrors. Large vehicles have significant blind spots, especially behind them. If you follow too closely, the driver may not be able to see you, increasing the risk of an accident. Keeping a safe distance ensures visibility and gives you more time to react if the large vehicle suddenly slows down or stops.

At a T-junction, if your view is obstructed due to parked vehicles, you should ease forward cautiously until you can see clearly without crossing the give-way lines. This helps ensure that you have a clear view of oncoming traffic from both directions before proceeding safely. Always make sure to move gradually to avoid any sudden risks, and never rely on passengers to signal for you. Safety should be your priority.

When reversing, the driver and ground are generally visible, especially with proper mirrors and camera systems. However, a child (especially one who is small) can be difficult to see, making them a higher risk. It's essential to check blind spots and be extra cautious when reversing, particularly in areas where children may be present.

The safest and most appropriate way to cross a clear road is to walk across it at a steady pace. Running or jumping can increase the risk of tripping or losing balance, while attempting to stop traffic yourself is unsafe and impractical. Always ensure the road is clear and use designated crossings where available.

Before stopping, you should use the mirrors to check for traffic behind you. This helps ensure that stopping is safe and does not cause a hazard for other road users. Checking your mirrors allows you to be aware of approaching vehicles and adjust your braking accordingly.

To correct a rear-wheel skid, you should steer in the same direction as the skid (steer into it). This helps you regain control by aligning the wheels with the direction of travel. Avoid sudden braking or acceleration, as this can make the skid worse.

If a vehicle comes up quickly behind you, flashing its headlights, it's signaling that it wants to overtake. The safest option is to allow the vehicle to pass. Maintain your speed and position, but don’t speed up or brake abruptly—just let the other vehicle safely overtake.

Leaving both parking and hazard lights on make your vehicle more visible to other drivers and pedestrians, especially in poorly lit areas, thus reducing the risk of accidents. 

When a bus stops to drop off passengers, some may suddenly cross the road without checking for oncoming vehicles. This creates a high risk of accidents, especially if they step into traffic unexpectedly. Always slow down and stay alert when approaching a stopped bus.

When encountering a tractor traveling slowly on a busy road, other vehicles may become impatient and attempt to overtake. You should expect that one of the vehicles behind the tractor might suddenly move into your lane to overtake, especially if the tractor is traveling slowly. Always stay alert and be prepared for sudden movements from other drivers, particularly in areas with limited visibility.

When following a large vehicle, stay out of its blind spots by positioning your vehicle in a place where the driver can see you in their mirrors. These blind spots are usually located directly behind the vehicle, along the sides (especially the right side), and sometimes in front of the vehicle. To avoid these, ensure you:

• Position yourself slightly to the left of the large vehicle, staying visible in the driver's side mirror.
• Keep a safe distance so you aren't directly behind or too close to the vehicle.
• Pass the vehicle quickly when overtaking to minimize the time spent in their blind spots.

This will help you stay visible and reduce the risk of accidents.