Random 30 Road Sign Test

Warning signs are typically triangular in shape with a red border and a white background. These signs are used to alert drivers about potential hazards ahead, such as sharp bends, pedestrian crossings, or roadwork.

The sign with a triangle and an exclamation mark generally indicates a warning for other dangers on the road. This could involve various hazards such as road conditions, obstacles, or changes in traffic. It’s a reminder for drivers to stay alert and proceed with caution.

The correct answer is "Triangular signboards."

Warning road signs are typically triangular in shape with a red border. They are used to alert drivers of potential hazards ahead, such as sharp bends, pedestrian crossings, or animal crossings.

• Circular signboards are usually used for regulatory signs, such as speed limits and no-entry signs.
• Rectangular signboards are generally used for informational signs, like road directions and place names.
• Square signboards are less common but are sometimes used for special information signs.

Therefore, warning road signs are indicated on triangular signboards.

A triangular road sign would most likely indicate a "low bridge ahead" as triangular signs are typically used to warn drivers of potential hazards on the road, and a low bridge is considered a hazard that needs attention.

Informatory signs provide guidance or information to road users, and they are typically rectangular in shape with a green or blue background.

The Uneven Road sign warns drivers about a rough or bumpy road surface ahead. This could be due to road repairs, potholes, or natural terrain changes. Drivers should reduce speed and proceed with caution to maintain control of their vehicle.

This warning sign indicates a steep hill ahead with an upward incline. Drivers should prepare for the ascent by selecting an appropriate gear and maintaining a steady speed to avoid straining the engine.

You’re looking at an Uneven Road Sign.

The Uneven Road sign warns that the road surface ahead is irregular or bumpy, which may affect vehicle control — drivers should reduce speed and proceed with caution.

You’re looking at a Dual Carriageway Ahead road sign.

The Dual Carriageway Ahead road sign warns the driver that the road ahead is divided by a barrier, with traffic flowing in opposite directions.

This sign indicates Road Work Ahead.

It alerts drivers to construction or maintenance activities on the road ahead. Drivers should slow down, follow instructions, and watch out for workers and machinery.

The sign shown means Dual Carriageway Ends.

Dual Carriageway Ends warns the driver that the divided road will soon become a single road with traffic in both directions. Proceed with caution.

The sign displayed is Steep Hill Downwards.

The Steep Hill Downwards road sign warns the driver of a sharp downhill slope ahead. Slow down and control your speed carefully.

The sign displayed is for Cyclists

This warning sign indicates that cyclists may be on or crossing the road ahead. Drivers should stay alert and give them plenty of space.

The No Entry for Tractors sign means that tractors and other agricultural vehicles are prohibited from entering or using the road beyond this sign. It's usually placed where such vehicles could cause danger or obstruction.

This sign means no vehicle is allowed to overtake another on the stretch of road ahead — regardless of the vehicle type. It’s usually placed in dangerous or limited-visibility areas such as bends, hills, or near pedestrian crossings to reduce collision risks. It applies to all vehicles, not just heavy ones.

This sign restricts goods vehicles longer than 10 metres from entering the road ahead. It's used in areas with tight bends, narrow roads, or weight/length restrictions, where long vehicles could pose a hazard or block traffic flow.

Warns that vehicles pulling trailers are not allowed to enter the road ahead. Only vehicles without trailers may proceed. This is common in areas where trailers could cause traffic issues, safety concerns, or damage to the road infrastructure.

The No Entry for Buses sign indicates that buses are prohibited from entering the road beyond this point. It’s often used on narrow or residential roads where large vehicles could cause congestion or pose a danger.

This sign indicates the maximum speed limit is 50 kilometers per hour. Drivers must not exceed this speed. It's used in areas where lower speeds are necessary for safety — such as residential zones, towns, or near schools.

This sign indicates that parking is not allowed at any time in the area where the sign is placed. However, temporary stopping is allowed, such as dropping off or picking up passengers — as long as the driver stays with the vehicle. It helps keep traffic flowing and ensures visibility and access on busy or narrow roads.

The correct answer is "Compulsory Roundabout".

This sign means you must enter the roundabout and move in the direction of the arrows. Follow the traffic flow — don’t go the opposite way.

The correct answer is "Keep Right".

This sign means you should drive on the right side of any obstacle or divider ahead. Always keep to the right as the sign shows.

The correct answer is "Turn Left at Junction".

This sign instructs drivers to make a left turn at the next intersection. They cannot go straight or turn right.

The correct answer is "Level Crossing 60m Ahead".

This sign means a railway crossing is 60 metres ahead. Slow down and look both ways for trains. Be ready to stop if one is coming.

The correct answer is "End of Motorway".

This sign means the motorway is coming to an end. Get ready for normal roads ahead — there may be lower speed limits, crossings, or slower traffic.

The correct answer is "Motorway".

This sign means you’re entering a motorway — a fast road made for cars and other quick vehicles. People walking, riding bicycles, or driving slow machines are not allowed here.

This sign tells drivers to slow down and look out for people crossing the road. Always give way to pedestrians.

Warns drivers to slow down and watch for people crossing the road.

The correct answer is "Route for Cyclists Only".

This sign means the path is only for people riding bicycles. Cars and people walking are not allowed to use it.

The correct answer is "Route for Pedestrians Only".

Indicates that this path is only for people walking. Cyclists and vehicles must not use it.

The correct answer is "No Through Road on Left".

This sign means the road on your left doesn’t go through. Only turn left if you really need to.